Internet printing for Windows®415® 4.0 and Windows® 2000/XP users>14 Select the Océ Internet port (BIP...) which you selected in step 6 and press Next.15 Select the desired model of the remote printer (for example, Océ HL-series). If necessary, click HaveDisk to load the driver from the CD-ROM. Click Next when you are done.16 If you have selected a printer driver that is already being used, you have the option of either keeping theexisting driver (recommended) or replacing it. Select the desired option and press Next.17 Enter any desired name for the BIP remote printer and press Next. Note that this name does not needto match the port name that you assigned in step 6, or E-mail address that you assigned in step 9.18 Select No when asked if you want to print a test page, unless you have already configured the remoteprint server to receive BIP print jobs.You have now finished installing the BIP software. If you need to configure another remote print server, go tothe next section, “Adding a Second Océ Internet Port”.Adding a Second Océ Internet PortYou should not re-run the install program to add a new Océ Internet Port. Instead, press the Start button,select Settings, and open the Printers window. Click on the icon of a printer that is using BIP, select Filefrom the menu bar, and then choose Properties. Click on the Details (Ports on Windows® 2000/XP andWindows NT ® 4.0) tab and click the Add Port button.In the Add Port dialog, select the Other radio button (Windows ® 98/Me only) and then Océ Internet Port.Click OK (New Port on Windows ® 2000/XP and Windows NT® 4.0) and it will give you the Port Name textbox. Any unique name can be given here as long as it starts with “BIP” and another port does not alreadyexist with the same name.
