VL3622/VL4222/VL5022 5-59Transmitting data 55.4.17 Application - TX Stamp (G3/IP/I-FAX)TX StampWhen sending a document using the ADF, a TX Stamp can be printed on the original after it is scanned toenable page-by-page checking that scanning has succeeded. When sending a double-sided original, a TXstamp is only printed on the front page.When [TX Stamp] is enabled, a stamp with a diameter of 4 mm is printed in pink at the position shown in thefigure.To enable printing a stamp, the optional stamp unit is required.The stamp ink is a consumable item. If the stamp color becomes faint, contact your service representative.When the original is mixed, the stamp position may be displaced from the point shown in the figure.To check that the original is successfully transmitted, refer to the transmission report or the transmissionresult that appears on the setting confirmation screen.Printing a TX stamp% Select [TX Stamp] on the Application screen.Front surface of originalOriginal transmittingdirection Stampposition
