VL3622/VL4222/VL5022 10-49Administrator mode settings 1010.5.8 Fax Settings - TX/RX SettingsFor the setting procedure, refer to "Fax Settings - TX/RX Settings" on page 10-25.!DetailTo enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".The available tray types vary depending on the options that are installed.10.5.9 Fax Settings - Function SettingsFunction ON/OFF Setting - Destination Check Display FunctionFor the setting procedure, refer to "Function ON/OFF Setting - Destination Check Display Function" onpage 10-32.Memory RX SettingFor the setting procedure, refer to "Memory RX Setting" on page 10-33.10.5.10 Fax Settings - Report Settings - Output SettingsActivity ReportFor the setting procedure, refer to "Activity Report" on page 10-38.TX Result ReportFor the setting procedure, refer to "TX Result Report" on page 10-38.Sequential TX ReportFor the setting procedure, refer to "Sequential TX Report" on page 10-39.Broadcast Result ReportFor the setting procedure, refer to "Broadcast Result Report" on page 10-41.TX Result Report CheckFor the setting procedure, refer to "TX Result Report Check" on page 10-42.Network Fax RX Error Report% Specify the output setting for the network fax RX error report. Select the option to output or not tooutput.
