Oce VarioLink 3550p User Manual

Also see for VarioLink 3550p: User guide Setup guide

Contents

VarioLink 3550p Series Network Guide> 8Once the protocol has been installed and configured in Windows, thenext step is to configure the TCP/IP parameters in the networkprinter.CONFIGURING AS A NETWORK PRINTERWINDOWS 95/98/MEWhen printing using TCP/IP, the Océ LPR utility is the only option touse. The following procedure should be used. When installing thedriver, ensure it is installed as a local printer and not a networkprinter. Ensure the appropriate printer driver has been installed inWindows.Install the Océ LPR utility as described in “OKI LPR” on page 14 ofthis manual and add the printer installed earlier.WINDOWS NT 4.0With Windows NT 4.0, you have two options for printing using TCP/IP. They are:• Océ LPR• Microsoft LPRIn order to use Microsoft LPR, it must first be installed into youroperating system.NT 4.0 requires administrator privileges.Océ LPRPlease follow the procedure described in the Windows 95/98/Mesection “OKI LPR” on page 14.Microsoft LPRTo install this port, the following needs to be carried out.1. Select [Start], [Settings], [Control Panel] and then select[Printers].2. Select [Add Printer] Wizard.3. Select [My Computer] and then [Next].4. Select [Add Port].5. Select [LPR Port] and then [OK].