Oce VarioLink 3550p User Manual

Also see for VarioLink 3550p: User guide Setup guide

Contents

VarioLink 3550p Series Network Guide> 101. Select [Start], [Settings], [Control Panel and Printers].2. Open the [Printers] folder.3. Double-click [Add Printer] and then select [Next].4. Select [Local Printer], clear the [Automatically detect myprinter] check box, and then select [Next].5. Select [Create a new port] and then [LPR Port].6. Select [Next] and then provide the following information:In [Name or address of server providing LPD] enter the hostname or Internet Protocol (IP) address of the host for theprinter you are adding.In [Name of printer or print queue on that server] type lp.Follow the instructions on the screen to finish installing theTCP/IP printer.Port 91001. Select [Start].[Settings].[Control Panel].2. Open the [Printers] folder.3. Double-click [Add Printer] and then select [Next].4. Select [Local Printer], clear the [Automatically detect myprinter] check box and then click [Next].5. Select [Create a New Port] and select [Standard TCP/IP Port].6. Select [Next].7. The [Welcome to the Add Standard TCP/IP Printer PortWizard] will appear.8. Select [Next] and provide the following information. Enter[Printer name] or IP address, for example: 172.168.1.31. Ifthe above IP address is entered, the Port Name will default toIP_172.168.1.31.9. Select [Next]. Additional port information will be required.10. Under [Device Type], select [Custom] then [Settings].11. Ensure [Protocol] is set to [Raw].12. Ensure [Port Number] is 9100 and [SNMP Status Enabled] isdeselected.