Oce VarioLink 3550p User Manual

Also see for VarioLink 3550p: User guide Setup guide

Contents

VarioLink 3550p Series Network Guide> 6been installed refer to the section below Installation of TCP/IP protocol.2. If not already configured, a suitable IP address, Subnet Maskand Gateway address should be configured. Please refer tothe on-line help if necessary. It is vital that the IP addressentered is unique and valid. Entering an incorrect IP addressmay cause severe network problems. Please check theaddress with the network administrator.3. If your network environment uses domain names, DNSshould be enabled and configured on your system. However,this step is not essential to enable network printing.4. Restart the operating system.WINDOWS 95/98/Me1. Click the [Start] button, select [Settings] and then click[Control Panel].2. In the [Control Panel] double-click on the [Network] icon.3. In the [Network] dialogue box click [Configuration Panel].4. If the [Client for Microsoft Networks] is not listed, click [Add].5. In the [Select Network Component Type] dialogue box, select[Protocol] then click [Add].6. In the [Select Network Protocol] dialogue box, select[Microsoft] from the list of manufacturers, then select [TCP/IP] from the list of network protocols, then click [OK].7. The Windows installation CD-ROM may be required. Followthe remaining dialogue box prompts.WINDOWS NT 4.01. Click [Start], select [Settings] and then click [Control Panel].2. Double-click the [Network] icon.3. In the Network dialogue box, click the [Protocols] tab.4. If the [TCP/IP Protocol] is not listed, click [Add].5. In the [Select Network Protocol] dialogue box, select [TCP/IPProtocol] and click [OK].