Oce VarioLink 3550p User Manual

Also see for VarioLink 3550p: User guide Setup guide

Contents

VarioLink 3550p Series Network Guide> 27PRINTINGTo specify the output format of printing, enter the followingcommand:-C, [Parameter], [Parameter]Enter a "," (comma) after -C followed by the parameters whichspecify the output format. To specify multiple parameters, separatethem with ",".For example, to output a file named "file1" 2-sided on A4 to printer"P001", enter the following command:%lpr -P P001 -C, DUP, A4 fileImportant:> If the command specified by the -C option exceeds 64characters, the operation may not function correctly.PRINTING FROM A MACINTOSH COMPUTERPRINTING FROM A MACINTOSH COMPUTERThis section explains the installation procedure for printing from aMacintosh computer.SYSTEM CONFIGURATIONAs the printer supports EtherTalk and LPD protocol, you can printfrom Macintosh. NOTE > Printing using the LPD protocol is availableonly with the Mac OS X.TARGET COMPUTERSThe printer supports a Macintosh or Power Macintosh with thefollowing OS:• Mac OS 10.2 and upSET UP PROCEDUREThe setting procedure is as follows:1. Use the printer Operator Panel or EWS to set the followingport to [Enable].