VarioLink 5022/VarioLink 4222/VarioLink 3622 4-20Manual installation using the Add Printer wizard 415 Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]button.– Select the specified folder according to the printer driver to be used, the operating system, and thelanguage.Printer drivers that can be selected:Windows Vista: PCL driver, PS driver, fax driver– For details of the built-in CD-ROM construction, see "Contents of CD-ROM" on page 1-9.16 Click the [Next] button.17 Follow the on-screen instructions.– If the User Account Control window appears, click the [Continue] button.– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver softwareanyway".18 Click the [Close] button.19 After installation is completed, make sure that the icon of the installed printer appears in the Printerswindow.20 Remove the CD-ROM from the CD-ROM drive.This completes the printer driver installation.4.2.4 Local connectionWhen this machine is connected via a USB port, the printer driver can be installed with plug-and-play.2 NoteWhen a connection is made with the USB port, the local interface kit is required.When a USB connection is used, the printer driver is installed easily with the Plug and Play feature.However, it can be installed using the Add Printer Wizard. When using the Add Printer Wizard, selectthe USB port to be connected in the Select a Printer Port dialog box.1 Connect this machine to a computer using a USB cable, and then start up the computer.– Do not disconnect or connect the cable while the computer is starting up.2 Turn on the main power of this machine.The Found New Hardware Wizard dialog box appears.– If the Found New Hardware Wizard dialog box does not appear, turn off this machine, then on again.– When turning off the power, then on again, wait at least 10 seconds before turning it on again.Otherwise, this machine may not function properly.3 Click "Locate and install the driver software (recommended)".– If the disk is not available, click "I don’t have the disk. Show me other options". In the next window,select "Browse my computer for driver software (advanced)", and then specify the desired printerdriver folder.The dialog box prompting you to insert the disk appears.4 Insert the Driver CD into the CD-ROM drive of the computer.The information on the disk is retrieved. A list of software supporting this machine appears.5 Specify the name of the desired printer driver, and then click the [Next] button.– Printer drivers that can be selected: PCL driver, PS driver, fax driver6 Follow the on-screen instructions.– If the "User Account Control" window appears, click the [Continue] button.– If the dialog box of Windows Security appears, click "Install this driver software anyway".7 When the installation is completed, click the [Close] button.
