VarioLink 5022/VarioLink 4222/VarioLink 3622 5-4Installation on Macintosh computers 5Specifying the AppleTalk settingsSpecifying the AppleTalk settings for this machineEnable AppleTalk in "AppleTalk Setting", and then enter the printer name.!DetailFor details on the AppleTalk settings of this machine, refer to the User’s Guide [Network Administrator].Specifying the AppleTalk settings for the computerSpecify the AppleTalk settings for the Macintosh computer connected to this machine.1 On the "Apple" menu, select "System Preferences".2 Click the "Network" icon.3 From "Show", select "Built-in Ethernet".4 Click the AppleTalk tab, and then select the "Make AppleTalk Active" check box.5 Click the close button at the upper left corner of the dialog box.– When the "Apply configuration changes?" message appears, click the [Apply] button.Adding a printer1 Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "PrinterSetup Utility" to open it.2 When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, clickthe [Add] button.– If available printers have already been set up, the Add Printer dialog box does not appear.– If the printer is not detected, turn off this machine, then on again.– When turning off the power, then on again, wait at least 10 seconds before turning it on again.Otherwise, this machine may not function properly.The connected printers are detected.3 From the "Printer Name" list, select the desired model name and connection (AppleTalk).
