Copy an A3/Tabloid 11x17 original from the platenIntroductionYou can place originals on the platen that cannot be handled by the automatic documentfeeder ‘Using the automatic document feeder or the platen’ on page 39. The platencannot detect the dimensions of your original. If you copy an A3/Tabloid 11x17original from the platen, you must set the paper size of your original.If the required copy size is not A3/Tabloid 11x17, you must set the required copy sizeand adjust the enlargement or reduction ‘Use the platen to create an enlarged orreduced copy’ on page 103.How to copy an A3/Tabloid 11x17 original from the platen1. Place the original face down in the left rear corner. Align the short edge of the original invertical position on the platen ‘Place an original on the platen’ on page 42.2. Close the cover of the platen.3. Press the 'Copy' key.4. Select '1-sided' in the 'Original' and 'Copy' boxes.5. Select 'No' in the 'Staple' box.6. Press the 'Paper' key.7. Select the A3/Tabloid 11x17 paper size in the 'Tray' box.[89] Select A3/Tabloid 11x178. Use the numeric keys to enter the number of copies.9. Press the Start key .10. Do not forget to remove the original from the platen.101Chapter 6 - The copy jobsCopy an A3/Tabloid 11x17 original from the platen
