Use the automatic document feeder to create an enlarged orreduced digital documentIntroductionIf you want to enlarge or reduce your digital document, you only need to select therequired page size for the digital document. An appropriate reduction or enlargementwill be selected automatically. The enlarged or reduced image will be aligned in thecenter of the page.[40]Location of image on the pageZoom directionHow to use the automatic document feeder to create an enlarged or reduced digitaldocument1. Place and align the originals face down in the automatic document feeder ‘Insert originalsin the automatic document feeder’ on page 40.2. Press the 'Scan' key.3. Select a destination for your digital document ('to Océ Intra Logic', 'to Email', 'to USBstick', 'to server') ‘The destination for the digital document’ on page 117.4. Use the scroll wheel to select a scan profile, if necessary ‘The scan profiles’ on page 119.5. Press the 'Edit settings' key or press the scroll wheel key.6. Select '1-sided' or '2-sided' in the 'Original' box.7. Press the 'Digital document' key.8. Select the required page size and orientation in the 'Size' box.Check that the orientation matches the feed direction of the originals. The enlargement orreduction is adjusted automatically.[113] Select the page size for your digital document9. Press the start key .Note: You may be asked to enter one or more job codes.123Chapter 7 - The scan jobsUse the automatic document feeder to create an enlarged or reduced digital document
