Useful transmission functions 6cm5520 6-61Useful transmission functions Chapter 66.18 Sending the fax after reconfirming the destination(Destination Check Display Function)Destination Check Display FunctionAfter pressing [Start] key on completion of destination specification, the des-tination list screen is displayed with the number of destinations. As the fax issent after reconfirming the destination, misdirected transmission due to themistake in the destination can be prevented.!Detail[Destination Check Display Function] must be set to [ON] to use the des-tination Check Display Function. For details, refer to “Specifying the ON/OFF settings of the function (Function ON/OFF Setting)” on page 10-59.Sending a fax after reconfirming the destination1 Press [Fax/Scan] key to display the Fax/Scan screen.2 Load the original.– For details on loading originals, refer to “Loading the original” onpage 2-7.3 If necessary, set [Scan Settings], [Original Settings] and [Communica-tion Settings].– For details on Scan Settings, refer to “Specifying scanning condi-tions” on page 2-12 or “Scan Settings” on page 6-2.– For details on Original Settings, refer to “Original Settings” onpage 6-4.– For details on Communication Settings, refer to “CommunicationSettings” on page 6-5.4 Specify the destination.– For details on destination, refer to “Specifying only one destination”on page 2-17 and “Specifying multiple destinations (Sequentialbroadcast transmission or broadcast transmission)” on page 2-26.
