10 Utility mode10-12 cm5520Utility mode Chapter 10Administrator Settings > Fax Settings > Function Settings > FunctionON/OFF SettingON/OFF settings of the function for transmission or reception are specified.(page 10-59)Administrator Settings > Fax Settings > Function Settings > Memory RXSettingsWhether or not to use the Memory RX function is set. (page 10-63)Item Description Values that can be setFunctionON/OFFSettingF-Code TX Set whether or not to use the F-code transmission function.For details on F-code transmis-sion, refer to page 6-69.ON*/OFFRelay RX At relay distribution station, orig-inal received from Originatingstation is broadcast to relay dis-tribution destination. The relaybox should be registered in orderto use the relay distribution func-tion.ON*/OFFRelayPrintingThe original received from Origi-nating station is printed.ON/OFF*Destina-tion CheckDisplayFunctionWhether or not to display the listof specified destinations at thetime of sending the fax is set.ON/OFF*Item Description Values that can be setMemory RX Settings Whether or not to use the MemoryRX function is set.When these settings are valid, set apassword (within 8 digits) to be usedat the time of printing.Memory RX is the function of printingthe received original after storing inthe memory for some time and thenprinting after the receiving such in-struction and not printing it immedi-ately.Set password in 8 digits/NO*
