Reports and Lists 11cm5520 11-33Reports and Lists Chapter 1111.15 Relay Request ReportRelay Request Report is printed automatically when an original is receivedfrom originating station as intermediate relay station.ON/OFF can be set in [Relay Request Report] of the Utility mode.Destination: Any of the following is described.- Destination name when destination name is registered in Address Book.- Recipient’s telephone numberStart Time: Describes the start time of the communication.Time: Describes the time required for communication.Prints: Describes the number of sheets sent.Result:OK: Described when communication is terminated normally.S-OK: Described when communication has stopped.PW-OFF: Described when operation power switch was turned OFF duringcommunication.TEL: Described when there is telephone call.NG: Described when there is communication error.Cont: Described when there is a transmission error and that there is tran-sition to resend wait mode (Error page redial).No Ans: Described when there is no response from the recipient.Busy: Described when communication is not possible as the recipient’sline is busy.M-Full: Described when it is not possible to receive a fax when the fax filememory becomes full during reception.
