11 Reports and Lists11-2 cm5520Reports and Lists Chapter 1111 Reports and Lists11.1 Report / List TypesThis machine prints the following types of reports and lists.ReportsReports include automatically printed reports, reports for which printingmethods can be set and reports for which printing commands can be givenif required.Report Name DescriptionActivity Report Sending and receiving records are described in this report.A total of 100 communications including transmission andreception are recorded on different pages for transmissionand reception respectively. The Activity Report is printedautomatically and reports displaying transmission recordsonly, reception records only or transmission and receptionrecords together can be printed independently.Printing interval can be selected from OFF/Daily/Every 100comm./100/daily in Administrator Settings of the Utilitymode.Report output time can also be specified when Activity Re-port output is set to [Daily] or [100/daily].Activity Report can be printed by selecting the followingcontents if the buttons are touched in the order of [JobList]>[Job Details]>[Send]>[Job History]>[Comm. List].TX ReportRX ReportActivity ReportTX Result Report Transmission result is printed automatically. The printingtime can be selected from ON/If TX Fails/OFF in the TX Re-sult Report settings of the Utility mode.Polling TX Report Polling TX Report is printed automatically when [TX ResultReport] in the [Report Settings] of the Utility mode is set to[ON] or [If TX Fails].Polling RX Report Polling RX Report is printed automatically when [TX ResultReport] in the [Report Settings] of the Utility mode is set to[ON] or [If TX Fails].Sequential Polling RX Report The Sequential Polling RX report is printed automaticallywhen [Sequential TX Report] in the [Report Settings] of theUtility mode is set to [ON].Broadcast Report Broadcast Report is printed automatically when the se-quential broadcast ends when [Sequential TX Report] in the[Report Settings] of the Utility mode is set to [ON].Reservation Communication Re-portReservation Communication Report is printed automatical-ly when transmission is reserved when [Timer ReservationTX Report] in the [Report Settings] of the Utility mode is setto [ON].
