Oce cm6520 User Manual

Also see for cm6520: Programming Date & Time User guide User guide User guide Quick guide

Contents

2 Using copy functions2-12 cm6520Using copy functions Chapter 22.5 Selecting document and copy settingsThe type of document and copy can be specified.The following document and copy settings are available.*1 If “1 > 2” or “2 > 2” is selected, specify the binding margin position for thecopy and the orientation of the loaded document, otherwise the copies willnot be printed as desired.For details on specifying the document orientation, refer to "Selecting thedocument orientation (Original Direction settings)" on page 1-17.*2 If “2 > 1” or “2 > 2” is selected, select the position of the binding marginand the orientation of the loaded document, otherwise the copies will notbe printed as desired.For details on specifying the document orientation, refer to "Selecting thedocument orientation (Original Direction settings)" on page 1-17.For details on specifying the binding margin position of the document, refer to"Selecting the position of the binding margin (Original Binding Position/Binding Position settings)" on page 1-19.!DetailWhen the document is scanned from the original glass using the “1 > 2”, “2 > 1”or “2 > 2” settings, the scanned pages are stored and printed together.Follow the procedures described below to select document and copy settings.Setting Description1 > 1 Select this setting to produce single-sided copies from single-sideddocuments.1 > 2*1 Select this setting to produce one double-sided copy from two single-sided documents.2 > 1*2 Select this setting to produce two single-sided copies from one double-sided document.2 > 2*1*2 Select this setting to produce double-sided copies from double-sideddocuments.