3 Using fax/scanning functions3-12 cm6520Using fax/scanning functions Chapter 32 Using the control panel keypad or the keypad that appears in the touchpanel, type in the fax number.– Otherwise, touch [Enter Registered No.], use the keypad to type indestination registration number, and then touch [Apply].– To specify an additional recipient, touch [Next Destination], and thenenter the number.– To return to the Address Book screen, touch [Main Screen].– When typing in a fax number:[Tone]: If pulse dialing is being used, touch this button to send a push-button tone. This is used when a fax information service is being used.“T” appears in the screen. If pulse dialing is being used, use toswitch to a push-button tone.[Pause]: Touch this button to insert a pause when dialing. Touch [Pause]once to insert a 1-second pause. In addition, multiple pauses can beentered. “P” appears in the screen. If the PBX (private branch exchange)connection is enabled, touch [Pause] after the outside line access code(for example, “0”) for reliable dialing when transmitting from an inside lineto an outside line. “P” appears in the screen.[–]: Touch this button to insert the dash as separator symbol while dialing.This has no effect on the dialing. “–” appears in the screen.– To change a character in the entered text, touch [←] and [→] to move thecursor to the character to be changed, and then touch [Delete].
