2 Using copy functions2-20 cm6520Using copy functions Chapter 23 Touch the button for the desired settings, and then touch [PositionSetting].4 Select the desired position.– Touch [Auto] to automatically determine the stapling or hole-punchingposition according to the orientation of the loaded document. The paperis stapled or holes are punched along the long side of the paper if thedocument length is 11-11/16 inch (297 mm) or less or along the shortside of the paper if the document length is more than 11-11/16 inch (297mm).When the “2 Position” Staple setting is selected5 Touch [OK], and then touch [OK] in the next two screens that appear.Otherwise, touch [Main Screen].The Basic screen appears again.2 NoteThe number of punched holes differs depending on the country (region) where theunit is installed. For details, consult your technical representative.
