2 Using copy functions2-14 cm6520Using copy functions Chapter 23 Touch the button for the desired settings, and then touch [OK].– If “1 > 2” or “2 > 2” is selected, touch [Output Bind Direction], select thebinding position for the copy, and then touch [OK].– If the binding position for the copy is set to “Auto”, the binding positionis set at the top or on the left side. The binding position is automaticallydetermined according to the orientation of the loaded document. If thedocument length is 11-11/16 inch (297 mm) or less, a binding positionalong the long side of the paper is selected. If the document length ismore than 11-11/16 inch (297 mm), a binding position along the shortside of the paper is selected.4 Touch [Close].The Basic screen appears again.
