Oce im2330 Network Administration Manual

Also see for im2330: Programming Date & Time Quick start guide User guide Operator's manual Specifications

Contents

Oce im2330 Network Administration Manual Manual pdf 20 page image

1 Setting up Network Server18 Setting up NetWare Print Server15 Enter the print server name, check the “Define additional proper-ties” option and click [Create].y The print server name must be “MFP_[NIC Serial Number]”. You can find the UnitSerial Number of the equipment on the NIC Configuration list can be printed from thecontrol panel.16 Display the Assignments window and click [Add].y The Select Object dialog box appears.17 Select a created printer and click [OK].18 Click [OK] to close Assignments window for the print server.y The print server is created.Setting up the NetWare in NDPS ModeThis equipment supports printing over NetWare 5.1/6.0/6.5 networks running either the TCP/IPprotocols or the IPX protocol. For pure IP printing, this equipment takes advantage of features inNDPS (Novell Distributed Print Services).An administrator can use either Novell Printer Gateway or Océ NDPS Gateway to set up theNetWare server in NDPS mode.P.18 “Setting up NDPS Using Novell Printer Gateway”P.22 “Setting up NDPS Using Océ NDPS Gateway”Setting up a NetWare environment correctly requires the presence and active cooperation of theNovell network administrator. You must have administrator privileges on the network to createnew NDPS objects.Setting up NDPS Using Novell Printer GatewayNDPS is not like the earlier queue-based versions of NetWare printing. Instead, you use anNDPS Manager and a Printer Agent, which control the tasks previously handled by a printqueue, print server, and spooler. You can also make the printer driver available for clients todownload from Windows client computers.Before configuring the NetWare file server in NDPS mode, please confirm followings:y For NetWare 5.1, the Support Pack 8 and Novell Gateway version 2.1.6 or later withndps3sp2c are installed.y For NetWare 6.5, the Support Pack 5 and Novell Gateway version 3.00 or later withndps3sp2c are installed.y Make sure you have a valid IP address for this equipment and for any computers that willprint to it (when used in the TCP/IP network).y In the equipment setup, enable TCP/IP and enter the IP address, Subnet mask, and Gate-way address for this equipment (when used in the TCP/IP network).Setting up the NDPS with NetWare Administrator1 In NetWare Administrator, select the container object to create theprinter and click the [Object] menu and select [Create].y The New Object dialog box appears.