Installing Client Software for USB Printing 25Installing Client Software for USB PrintingThis section describes how to set up the printer drivers when this equipment is connected withUSB cable.To set up the printer drivers for USB printing, you must install the printer drivers by Plug and Playfunctions instead of installing the client software using the installer in the Client Utilities CD-ROM.When this equipment is connected to a USB port of Windows Me, Windows 2000, Windows XP,or Windows Server 2003 computers, the Plug and Play Wizard automatically starts. You caninstall a printer driver using this method but other client software cannot be installed.y Document Monitor is not available when this equipment is connected using only the USBcable. However, when this equipment and your computer are connected to the local areanetwork and this equipment is connected to the USB port of your computer, you can useDocument Monitor to monitor your print jobs. To install Document Monitor, you must install itfrom the Client Utilities CD-ROM separately.y The Font Manager is also available to install and manage the TrueType fonts on your com-puter. To install the Font Manager, you must install it from the Font CD-ROM that comes withthe Printer Kit or Printer/Scanner Kit.P.372 “Installing Font Manager”USB printing is not supported in Windows NT 4.0.Installation for USB Printing by Plug and PlayThe procedure to install the printer driver for USB printing by Plug and Play differs depending onthe version of Windows used.P.25 “Windows XP/Server 2003”P.28 “Windows 2000”P.30 “Windows Me”Windows XP/Server 2003Installing the printer driver for USB printing by Plug and PlayThe following describes an installation on Windows XP. The procedure is the same when Win-dows Server 2003 is used.You must log into Windows as a user who has the “Administrators” or “Power Users” privilegewhen using Windows XP or Windows Server 2003.1 Power on this equipment and your computer.2 Connect the USB cable to this equipment and your computer.y The Found New Hardware Wizard dialog box appears.