Oce im4511 Operator's Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operation manual

Contents

Oce im4511 Operator's Manual Manual pdf 13 page image

11GENERAL PROGRAMSDisabling switching of display orderThis program is used to disable the function thatchanges the display order of tabs when a selected tabis touched repeatedly in screens that have tabs suchas the custom folder selection screen and folderselection screen of the document filing function and theaddress book screen of fax/image send mode.Disabling of clock adjustmentThis program is used to prohibit changes to the clockadjust setting. When the program is enabled, "Clock" inthe custom settings cannot be used. To adjust the dateand time, this program must first be disabled (removethe checkmark).Device controlUse these programs when a peripheral device on themachine has failed or when you wish to temporarilydisable a device. The programs can also be used tochange the function setting of a device as required byyour conditions of use."Device control" consists of the following programs: Original size detector setting Disabling of document feeder Disabling of duplex Disabling of stapler Disabling of punch Disabling of optional paper drawer Disabling of finisher Disabling of mail-bin stacker Disabling of covers/inserts mode Saddle stitch position adjust High speed stacking Auto paper selection setting Optimization of a hard diskOriginal size detector settingThis program is used to select the standard originalsizes that can be detected by the original size detectionfunction. Select one of the four groups indicated below.The factory default setting is "INCH-1 (AB-1)". Originalsize detection by the document glass can also bedisabled.If "CANCEL DETECTION AT DOCUMENT GLASS" isset, originals will be regarded as EXTRA for all copierfunctions and no original size will be displayed.Disabling of document feederThis program is used to prevent use of the reversingautomatic document feeder when it malfunctions. Inthis case, scanning can still be performed using thedocument glass.Disabling of duplexThis program is used to disable duplex printing whenthe duplex module malfunctions. If this program is set,only one-sided printing can be performed.Disabling of staplerThis program is used to disable stapling when thestapler unit of the finisher or the saddle stitch finishermalfunctions.Disabling of punchUse this program when you wish to prohibit punchingor when the punch unit of the finisher or saddle stitchfinisher has failed.Disabling of optional paper drawerThis program is used to disable use of the stand/3 x500 sheet paper drawer or stand/MPD & 2000 sheetpaper drawer when it malfunctions.Disabling of finisherUse this program when you wish to prohibit use of thefinisher or saddle stitch finisher, or when either hasfailed.Disabling of mail-bin stackerThis program is used to disable use of the mail-binstacker when it malfunctions.Disabling of covers/inserts modeUse this program when you wish to prohibit use of thecovers/inserts mode.GroupDetectable original sizesDocument feeder tray (for automaticdocument feeder)Document glass1 INCH-111" x 17", 8-1/2" x 14",8-1/2" x 11",8-1/2" x 11"R,5-1/2" x 8-1/2"A3, A42 INCH-211" x 17", 8-1/2" x 13",8-1/2" x 11",8-1/2" x 11"R,5-1/2" x 8-1/2"A3, A43 AB-1 A3, A4, A4R, A5,B4, B5, B5R11" x 17", 8-1/2"x 11",216x3304 AB-2 A3, A4, A4R, A5,B5, B5R, 216x33011" x 17", 8-1/2"x 11", B4