Oce im4512 Settings Manual

Also see for im3512: Programming Date & Time Facsimile operation manual Operation manual Operation manual Operation manual

Contents

Oce im4512 Settings Manual Manual pdf 19 page image

17COPY SETTINGSInitial margin shift settingThis setting is used to set the initial margin shiftamount.The initial margin shift amount can be set from 0" to 1"(0 mm to 20 mm) in increments of 1/8" (1 mm).Normally the margin shift is set to 1/2" (10 mm) for boththe front and back of the paper.Erase width adjustmentThis setting is used to set the initial width of edge erasecopying.The edge erase width can be set from 0" to 1" (0 mm to20 mm) in increments of 1/8" (1 mm).The edge erase and center erase widths are normallyset to 1/2" (10 mm).Card shot settingsThis setting is used to set the initial original size for thecard shot function.Enter the X dimension (width) first and then the Ydimension (length).Both the X and Y dimensions can be set from 1" to8-1/2" (25 mm to 210 mm) in increments of 1/8" (1 mm).Setting a maximum number of copiesThis setting is used to set the maximum number ofcopies that are allowed per original.Any number from 1 to 999 can be set for the maximum.The maximum number of copies is initially set to 999.Disabling deletion of job programsThis setting is used to prohibit the deletion andchanging of copy settings stored in job programs.Disabling of bypass-tray in duplex copyThis setting is used to disable the use of the bypasstray when making duplex copies.The bypass tray is often used to feed label sheets,transparency film, and other special papers for whichtwo-sided copying is prohibited. If one of these specialpapers enters the reversing unit, a misfeed or damageto the unit may result. If special media for whichtwo-sided copying is prohibited is often used, it isrecommended that you enable this setting.Disabling of auto paper selectionThis setting is used to disable the auto paper selectionfunction.When this setting is enabled, paper that is the samesize as the original placed on the document glass or inthe automatic document feeder is not automaticallyselected.