Setting Up Print Options 2594) [Center Watermark]Click this to automatically move the watermark position to the center.5) CaptionEnter the text of a watermark. You can enter up to 63 alphanumeric characters. When youare editing a watermark, the selected watermark text is displayed in the field.6) Font NameSelect a font to be used for the watermark text.7) StyleSelect the font style for the watermark text.- Regular — Select this to set the regular style to the text.- Bold — Select this to set the bold style to the text.- Italic — Select this to set the italic style to the text.- Bold Italic — Select this to set the bold and italic style to the text.8) Font SizeEnter the font size for the watermark text. The font size can be set from 6 to 300 pt in units of1 pt. You can also set the font size using the scroll bar.9) AngleEnter the degree of angle for rotating the watermark text. The angle can be set from -90 to90 degrees in units of 1 degree. You can also set the degree of angle by moving the scrollbar.10) SolidSelect this to print solid type of watermark.11) Draw as OutlineSelect this to print outline type of watermark.12) TransparencySelect this to transparent watermark. When you select this, set the brightness from 0(darker) to 100% (lighter) in units of 1%. You can also set the brightness using the scroll bar.— PostScript Settings1) Output FormatThis selects the output format for printing.- ASCII — The job is sent in the ASCII data format.- Encapsulated PostScript (EPS) — The job is sent in the EPS format.- Tagged BCP — Select this to send a job in Tagged Binary format over parallel ports.- Using Adobe DSC — Select this to send a job with the DSC comments.The EPS format is usually used for creating an image to import into another document.Therefore, only the first page of the document will be printed when “Encapsulated PostScript(EPS)” is selected.1243
