2 Installing Client Software for Windows30 Installing Client Software for Parallel Printing13 The installation is completed.Before using the printer driver for printing, please configure the installed options of theequipment and department code (if required) on the printer driver.P.216 “Before Using the Printer Driver”Installation for Parallel Printing by Plug and PlayThe procedure to install the printer driver for Parallel printing by Plug and Play differs dependingon the version of the Windows being used.P.30 “Windows XP/Server 2003”P.33 “Windows 2000”P.36 “Windows 98/Me”y Document Monitor is not available when this equipment is only connected using the printercable. However, when this equipment and your computer are connected to the local areanetwork as well as this equipment is connected to the parallel port of your computer, you canuse Document Monitor to monitor your print jobs. To install Document Monitor, you mustinstall it from the Client Utilities CD-ROM separately.y The Font Manager is also available to install and manage the TrueType fonts on your com-puter. To install the Font Manager, you must install it from the Font CD-ROM that comes withthe Printer Kit or Printer/Scanner Kit.P.400 “Installing Font Manager”The Plug and Play function is not supported in the Windows NT 4.0.Windows XP/Server 2003Installing the printer driver for parallel printing by Plug and PlayYou must log into Windows as a user who has the “Administrators” or “Power Users” privilegewhen using Windows XP or Windows Server 2003.1 Connect the printer cable to this equipment and your computer,and then power on the equipment and your computer.y The Found New Hardware Wizard dialog box appears.
