7 Printing from UNIX338 Printing from an ApplicationIf this option is not specified, the printer’s default value will be used.Example: The command to staple in the upper left corner of a long edge feed portrait page is “lp-o staple=1 filename”.The value for the stapling position depends on the paper size, the paper feed direction, and theprint direction. This function is not available for all paper sizes and the users should refer to thecopier manual for a list of compatible paper sizes. In particular, A5, A6 and statement papersizes will not work with this function.Output BinThe output bin can be specified using the following options.If the finisher option is not installed on the equipment, the default output tray will be used (inner).If the finisher option is installed on the equipment, the default output tray will be used (bin2).staple=2 Put two staples on the left side of a portrait page or thetop side of a landscape page printed on long-edge-feedpaper. This command has no affect when the paper isfed from the short-edge side.staple=3 Staple in the bottom left corner of a portrait page andthe upper left corner of a landscape page.staple=4 Staple in the top right corner of a portrait page and thebottom right corner of a landscape page.staple=5 Put 2 staples on the right side of a portrait page or thebottom side of a landscape page printed on long-edge-feed paper. This command has no affect when thepaper is fed from the short-edge side.staple=6 Staple in the bottom right corner of a portrait page andthe lower left corner of a landscape page.staple=7 Put 2 staples on the top side of a portrait page or theright side of a landscape page printed on short-edge-feed large format (A3/Ledger) paper. This commandhas no affect when the paper is fed from the long-edgeside or small paper size.staple=8 Put 2 staples on the bottom side of a portrait page orthe left side of a landscape page printed on short-edge-feed large format (A3/Ledger) paper. This commandhas no affect when the paper is fed from the long-edgeside or small paper size.staple=9 Put 2 staples in the middle of a landscape page and foldthe paper in half vertically along the staple line (saddlestitching). This command works in conjunction withbooklet printing. This command has no affect when thepaper is fed from the long-edge side.Option Value AlternateValue Descriptioninner Select the exit tray.bin1 Select the upper output tray of the finisher.bin2 Select the lower output tray of the finisher.Option Value AlternateValue Description
