20 Microline 320/321 Turbo|• If you’re using an extension cord or power strip with theprinter, make sure that the total of the amperes required byall the equipment on the extension is less than theextension’s rating. Generally, the total ratings of allequipment plugged into any one power line should notexceed 15 amperes. Don’t exceed this unless you knowthat the power line your equipment is plugged into has arating above 15 amperes.• To protect your printer from overheating, make sure noopenings on the printer are blocked. Do not put the printeron or near a heat source, such as a radiator or heat register.If you put the printer in any kind of enclosure, make sureit is well ventilated.Installation OverviewTo install your new printer, follow the instructions from the“Installation, Installation Location” to “Installation, PrinterDrivers” sections of this document. You must complete thesesteps for your printer to operate properly.If you have purchased an option package for your printer,refer to the documentation you received with that option forinstallation instructions.Installation Location• Place your printer on a firm, solid surface.• Allow enough space on each side of the machine to easilyaccess the platen knob and the various paper feed paths.• Make sure a power outlet is available nearby.
