|User’s Guide: English 11The first line prints at the red line of the plastic paper shield(1) on the printhead.The Top of Form and Forms Tear-Off settings of your printerinteract.How you set the Top of Form depends on the status of theForms Tear-Off menu setting.For more information, refer to “Using Your Printer, Top ofForm (TOF).”32T-18.epsMOperation TipsOperation Tip: Top of Form! If you turn the platen knob when the printer is turnedon, you will cause the Top of Form to mis-align. Alwaysturn the printer off before turning the platen knob!! Always determine the status of the Forms Tear-Off menusetting BEFORE setting the Top of Form. Refer to“Using Your Printer, Top of Form, Forms Tear-OffStatus (ON or OFF).”Top of Form sets the print start position for the printer. It isadjustable in increments of 1/144 of an inch. The amount ofadjustment is limited to avoid paper jams.The Top of Form may be left at the factory default (1 inch),changed for a single print job, or set to a new (permanent)default.1
