42 Microline 390/391 Turbo|Setting Top of Form, Forms Tear-Off ON(Step A)! If you turn the platen knob when the printer is turnedon, you will cause the Top of Form to mis-align. Alwaysturn the printer off before turning the platen knob!! Always determine the status of the Forms Tear-Off menusetting BEFORE setting the Top of Form. Refer to“Using Your Printer, Top of Form, Forms Tear-OffStatus (ON or OFF).”1 Turn the printer ON.2 Park the paper.3 With paper out of the unit, (red alarm light should be on)press SHIFT (1) and QUIET/TOF (5) to reset the currentTop of Form.4 Press FF/LOAD (3) to load the paper.5 Press SEL/MENU (6) to take the printer off line.The SEL light goes out.6 Wait until the paper moves up to the tear position, thenpress and hold TEAR (4).The paper moves to the current Top of Form.Keep pressing and holding TEAR.7 Press and hold SHIFT and release TEAR.
