|User’s Guide: English 91Problem 5:Ink smears on the paper when I print on narrow forms.Solution:This may be caused by excessive printhead travel from thecentering position. Enter the Menu and set the CenteringPosition to MODE 1. Refer to “Using Your Printer, MenuMode.”For the wide-carriage printer, if MODE 1 doesn't work, trysetting the Centering Position to MODE 2.Problem 6:I've installed a new ribbon and the printing is smearedand streaked.Solution:The ribbon shield is either loose or missing. Remove theribbon cartridge and check the ribbon shield.If it is loose, secure it.If it is missing, find it and install it.Problem 7:The ALARM light is flashing.Solution:Try turning the printer off and then back on again. If the lightstill blinks, call for service.Problem 8:The ALARM light is on and the Character Pitch 10 lightis flashing.Solution:This indicates that the paper lever is set at the wrong positionfor the paper you are trying to use. Move it to the propersetting.
