|User’s Guide: English 55Printhead GapThe printhead gap is the distance between the printhead andthe platen.! Make sure the printer is turned off before you open theaccess cover.To adjust the gap, open the access cover and move the bluelever (1) to the recommended setting from the table.32T-35.epsMedia Setting12-20 lb paper 120-24 lb bond paper 2Labels 3 or 4Envelopes 4 or 52-part form (with carbon) 1 or 23-part form (with carbon) 2 or 34-part form (with carbon) 3 or 45-part form (with carbon) 4 or 56-part form (with carbon) 5! For dedicated, bottom-feed printing of extra-thickcontinuous forms (requires optional push and/or pulltractor), the printhead gap range can be expanded totake forms up to 0.031" (0.79 mm) thick. For moreinformation, refer to “Using Your Printer, PrintheadGap, Expanded Printhead Gap.”1
