|User’s Guide: English 35Font Sample Test! The Font Sample Test automatically stops after all theavailable fonts print.! Wide Carriage ModelMicroline 391 TurboIf you are using 8.5 inch paper to run the test, make surethe paper width selection in the printer menu is set to8.5 inches. Otherwise, printing on the platen maydamage the printer. Refer to “Using YoThe Font Sample Test prints a sample of the fonts standard tothe printer.The top of the printout has the Printer Model, Emulation,Country Code, Interface, and Firmware Revision Level foryour printer.To run the test:• Turn the printer off, then press and hold the LF keywhile turning the printer back on.LF.epsLFGROUPMicro FeedDownTo exit the test:• Press SEL. SEL.epsSELSELMENU
