Contents - maintenance manual
- Table Of Contents
- Table Of Contents
- Table Of Contents
- General Performance
- General User's Function
- General Maintenance Functions
- General Appearance
- Basic Performance Specifications
- Reports and Lists
- power outage report
- activity report
- broadcast entry report
- broadcast confirmation report
- A. Setup Information
- Site Selection
- Unpacking
- Unpacking for OKIFAX 5000 Series
- Check of Contents
- Installation of Attachments
- Installation of Attachments for OKIFAX 5000 Series
- AC Cord Connection
- Telephone and Line Connections
- B. Programming and Initial Settings
- Technical Functions
- Technical Functions Example
- User's Functions
- specifications
- User's Functions Example
- Clock Adjustment
- Dual Access Operation (for OKIFAX 5000 series)
- System Data Programming
- Dial Parameters Settings
- Off-line Tests
- On-line Tests
- C. Installation of Optional Units
- BRIEF TECHNICAL DESCRIPTION
- Fundamentals of the Electro-Photographic Process
- Actual Electo-photographic Process
- Boards and Units
- Overall Dimension and Mechanical Structure of OKIOFFICE44/OKIFAX 4100
- Overall Dimension and Mechanical Structure of OKIFAX 5000 series
- General
- Tools
- LED Print Head
- ID Unit, Rear-Cover, Cover-NCU, Cover-Main and Board-NCU
- Unit-048 OPE-Panel
- Separation Rubber, Roller Assembly Sensor
- Roller Assembly-ADF, CIS (contact image sensor), Lever-PC1 and PC2
- Board-R44, OKIOFFICE 44/OKIFAX 4100 Power Supply Unit
- Option (Board-Memory: MEM, Board-CTR; PC Interface)
- Printer Unit Section
- Transfer Roller
- High-Voltage Power Supply Unit (TLHV/OLHV)
- Holder Assembly
- Plate-Side M and Gear-Idle
- Registration Roller
- Drive Shaft E (Eject) and Eject Roller
- Heat Assembly
- Pressure Roller B (Back Up Roller)
- Hopping Shaft Assembly
- Paper Sensor E, Paper Sensor Exit and Toner Sensor Assembly
- Printer Unit
- MECHANICAL DISASSEMBLY AND REASSEMBLY FOR OKIFAX 5100 SERIES
- How to Disassemble and Reassemble
- ID Unit, Rear Cover, NCU Cover, Main Cover, Separation Plate, NCU Board Modem Board
- Control Panel Assembly, Paper Guide (U) Assembly
- Sub-roller, ADF Roller Assembly, Pinch Roller, Contact Image Sensor, Document Detectors (PC1 and PC2)
- Resist Motor, Drum Motor, Release Guide Assembly, Manual Guide Assembly Stacker Cover, Fusing Unit
- Lower Base, Motor Assembly, Back-up Roller, Transfer Roller
- Resist Roller, Hopping Roller, Sensor Plates
- MCNT Board, Power Supply Unit, Contact Assembly, Transformer, Sub-PSU
- ADJUSTMENTS
- OKIOFFICE44/OKIFAX 4100 Confirmation Items
- OKIOFFICE44/OKIFAX 4100 Measurement
- OKIFAX 5000 Series Confirmation Items
- OKIFAX 5000 Series Measurement
- CLEANING AND MAINTENANCE
- Routine Inspection
- Routine inspection for OKIFAX 5000 series
- Printer Counter Display/Clear
- Self-diagnosis Test
- Sensor Calibration Test
- LED Test
- Tone Send Test
- High-speed Modem Send Test
- High-speed Modem Receive Test
- MF Send Test
- Tone (TEL/FAX)
- Protocol Dump Data Printing
- protocol dump
- System Reset
- Service Code
- TROUBLESHOOTING AND REPAIR FOR OKIOFFICE44/OKIFAX 4100
- Overall Troubleshooting Flow Chart
- No LCD Operation
- ALARM LED On
- Printing Test Failure
- No Local Copy
- Auto Dial Failure
- Transmission Problem
- Auto Reception Failure
- Reception Problem
- High-speed Modem Test
- Tone (TEL/FAX) Send Test
- No Acoustic Line Monitor
- Power Supply Unit
- No Document Feeding
- Multiple Document Feeding
- Document Skew
- Document Jam
- Precautions
- Troubleshooting Flow Charts of Printer Unit
- TROUBLESHOOTING AND REPAIR FOR OKIFAX 5000 SERIES
- DIPSWITCHS SETTING TABLE LIST
- appendix e board layout
- external view and component names
- mechanism description
- parts replacement
- parts layout
- parts replacement methods
- troubleshooting method
- notes to users
- rmcs basic operation
- message modifying tool
- file selection
|
40055101TH Rev.4 27 /The transmitter sends a call-back message to the receiver onlywhen the receiver does not respond to voice request of the transmit-ter.The fax can transmit a programmed alphanumeric message, such ascompany’s name, consisting of up to 32 characters.* (Outside only)Received TSI can be printed at the top of the received page.* TF + 05 (To enable or disable this function)The fax can automatically print out a power-outage report when thepower off condition occurs.The fax can print out an activity report manually, and provides arecord of your fax machine's last 30 communications. This reportdoes not contain the results of messages which were receivedwithout errors. However it does contain messages received inmemory with or without errors.* REPORT PRINTOUT+1(Manual printout)The fax can print out a message confirmation report manually orautomatically in the following cases.(1) When COPY key is pressed after a single locationcall, this report can be printed.(Manual printout)* FP + 01 (To enable or disable automatic printing)The fax can print out a broadcast entry report if specified duringoperating sequence of a broadcast.The fax can print out a broadcast confirmation report manually orautomatically.* COPY key (Manual printout): Pressed after a broadcast.* REPORT PRINTOUT + 2 (Manual printout)* FP +02 (To enable or disable automatic printing)Table 1.6.1 (1/2) Reports and Lists SpecificationsNo. Item Specifications1 Call-back message2 Sender ID3 Transmitting subscriberidentification(TSI) printing4 Cancel report(Power outage report)5 Activity report6 Message confirmation report7 Broadcast entry report8 Broadcast confirmation report1.6 Reports and ListsTable 1.6.1 shows Reports and Lists Specifications.Note: F +OT: Press FUNCTION and One-touch keyFP: Function program settingTF: Technical function settingRev.3
|
