40055101TH Rev.4 611 /Classification LCD Status Message Description Recovery methodJam error (feeding)*1Jam error (ejection)Paper size errorTray paper out*2• Check the paper in the SecondPaper Feeder.Carry out the recovery printingby opening and closing thecover, and turn the error displayoff.• When the problem occurs fre-quently, go through the Trouble-shooting.• Check the paper in the SecondPaper Feeder. Carry out therecovery printing by opening andclosing the cover, and turn theerror display off.• Check the paper in the SecondPaper Feeder.Also check to see if there was afeeding of multiple sheets.Carry out the recovery printingby opening and closing thecover, and turn the error displayoff.• Load the paper in Second PaperFeeder.Notifies of occurrenceof jam while the paperis being fed from Sec-ond Paper Feeder.Notifies of occurrenceof jam while the paperis being ejected fromthe Second PaperFeeder.Notifies of incorrectsize paper feedingfrom Second PaperFeeder.Notifies of no paperstate when both cas-settes (1st and 2nd)has no recording pa-per.PAPER JAM [FAX]REPLACE PAPERPAPER JAM [FAX]REPLACE PAPERNO PAPER [FAX]REPLACE PAPER*1: Indicates the same message on the display, when 1st or 2nd cassette becomes jam error(feeding).*2: However, if 1st cassette has recording paper, LCD indicates the standby mode on thedisplay and alarm message does not indicate.PAPER MIS-FEED[FAX]REPLACE PAPERProblem occursProblem displayed bythe LCD messageTroubleshootingaccording to the LCDStatus Message List(see 4.3.1)Carry out detailedtroubleshootingaccording to theTroubleshooting Flow(see 4.3.1)4.3 Troubleshooting MethodWhen a problem occurs, go through the troubleshooting according to the following procedure.4.3.1 LCD Status Message ListThe listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table4-1.
