40055101TH Rev.4 634 /4. Message Modifying Tool4.1 Activating the ProgramAfter activating the PC/AT with a hard disk, insert the RMCS system disk into drive A.When C>_ is displayed, enter the following commands to activate the program.C>A:[Enter]A> SCRNED [Enter]Then the screen for menu selection is displayed.• Press [0] - [2] to display a screen for FAX model selection of each service.• Press [Q] to terminate the program and return to PC-DOS.4.2 Modifying MessageFile selection:Select “MESSAGE” MODIFY” on the menu screen, then the following screen is displayed.Enter the key No. indicated on the left of the model to modify. Then the screen for file selection is displayed.• Press [Page Up] or [Page Down] to scroll the screen back to the previous page or up to the next page.• Press [Esc] to terminate the FAX model selection and return to the menu screen.< REMOTE MANAGEMENT CENTER SYSTEM ><< MESSAGE MODIFYING TOOL>>(MENU)[0] : MESSAGE MODIFY[1] : MESSAGE SAVE[2] : MESSAGE LOAD[Q] : TERMINATEPLEASE SELECT THE DESIRED ITEM.<< MESSAGE MODIFYING TOOL>>[S] : RMCS SYSTEM[0] : FAX MODEL0[1] : FAX MODEL1[2] : FAX MODEL2[3] : FAX MODEL3[4] : FAX MODEL4[5] : FAX MODEL5[6] : FAX MODEL6[7] : FAX MODEL7[8] : FAX MODEL8[9] : FAX MODEL9<< MESSAGE MODIFY>>[PAGE UP] : PREVIOUS PAGE[PAGE DOWN] : NEXT PAGEPLEASE SELECT THE FAX MODEL(PRESS THE ESC KEY TO CANCEL)1/1
