Oct 02Oki B6100 User Guide 3-11Interface MenuInterface MenuNOTE: Settings in your software application will override any settings in your printer driver.Your printer driver settings will override any settings from the printer menu or printer front panel.An installed port in your printer is automatically ON.If your printer is on a network, be sure to advise your network administrator of any changes youmake to the port settings. If you turn a port off, you may disrupt the ability of the printer to be usedby others on the network.The Interface Menu provides access to the printer interface settings. Use the following proce-dure to enter the interface menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “Interface Menu” is shown on the second line ofthe display.3. Press the SELECT button to enter the interface menu.4. Press the NEXT button to move through the submenus: Port, Parallel Setup, and USBSetup.5. Use the procedures in the following table to access and change the printer interface set-tings:Submenus DefaultSettingAvailableSettingsProcedure for Changing SettingPortThis submenu allows youto choose the type ofinterface.Parallel:OnUSB:OnParallel :On, OffUSB:On, Off1. Press NEXT or PREVIOUS to toggle betweenPARALLEL and USB.2. Press SELECT to save this setting.
