Oct 02Oki B6100 User Guide 3-17System MenuSystem MenuNOTE: Settings in your software application will override any settings in your printer driver.Your printer driver settings will override any settings from the printer menu or printer front panel.The system menu provides access to system settings. Use the following procedure to enter thesystem menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “System Menu” is shown on the second line of thedisplay.3. Press the SELECT button to enter the system menu.4. Press the NEXT button to move through the submenus: Factory Defaults, Display Lan-guage, Power Saver, Wait Timeout, Job Timeout, Jam Recovery, and Hex Print.5. Press the SELECT button to enter a submenu.6. Use the procedures in the following table to access and change the system settings:Submenus Default Setting Available Settings Procedure for Changing SettingFactory DefaultsThis submenu allows you to reset theprinter to U.S. or Non-U.S. factorydefaults.U.S. U.S.Non-U.S.1. Press NEXT or PREVIOUS totoggles between U.S. and NON-U.S.2. Press SELECT to choose and set thefactory defaults.Display LanguageThis submenu allows you to changethe language of the display messages.English EnglishFrenchGermanItalianSpanish1. Press NEXT or PREVIOUS to scrollthrough the available languages:English, French (Francais), German(Deutsch), Italian (Italiano), orSpanish (Espanol).2. Press SELECT to choose and set thelanguage.Power SaverThis submenu allows you to set thenumber of minutes the printer is idlebefore it reverts to Power SaverMode.15 0 - 999 1. Press NEXT or PREVIOUS toincrease or decrease the number ofminutes.2. Press SELECT to save this setting.Wait TimeoutThis submenu allows you to increaseor decrease the length of time (inseconds) that the printer will remainin the waiting state—a job is beingprocessed, no end-of-file has beendetected, and there is no more data toprocess. This setting applies to bothPCL and PostScript print jobs.20 0 - 99999 1. Press NEXT or PREVIOUS toincrease or decrease each digit of thefive-digit number.2. Press SELECT set one digit andmove to the next digit.3. Press SELECT after changing the lastdigit to save this setting.
