|
- 104 -Other Error Messages4 Troubleshooting●● Other Error MessagesThis section explains the causes and remedies for an error message and the function of the<ATTENTION> indicator. An error message appears on the display screen of the operator panel.To display an error code, press the <HELP> button on the operator panel.Error MessagesErrorcode Message indicator Cause/RemedyWarning □Error PostscriptLights up Interpreter detects an error due to thefollowing reason. Receive data after thisis ignored until the job completion. Whenthe job is completely received, this isautomatically cleared.- The job has a grammatical error.- The page is too complicated.Warning □%TRAY% EmptyLights up The tray is empty. Treated as Warning untilprinting to the empty tray is designated.Warning □%TRAY% Lift Up ErrorLights up Lift Up Error has occurred to Tray. That trayis treated "Paper Empty" as a result, andprinting from that tray becomes disabled.Warning □%TRAY% OverfilledLights up Displays that there is too much paper inTray. This is a warning; thus, printing willnot stop.Warning □File System is FullLights up Disk-full is occurring. Because this is atemporary warning, it remains until the endof the job and disappears.Warning □File System is Write ProtectedLights up An attempt to write in a read-only file wasdone. Because this is a temporary warning,it remains until the end of the job anddisappears.Warning □Erased Data FullLights up Indicates that a secret file waiting to beerased is full.Warning □Accounting Log Buffer is near fullLights up It indicates the Job Accounting log buffer isnear full.Warning □Accounting Log Buffer Full(Delete oldlogs)Lights up The function isn't accepted because logbuffer is full. (Related to JobAccount).This message is displayed, if the log bufferis full and "Operation at Log Full" in JobAccounting Server Software is set to "Deleteold logs".The new jobs will be able to execute afterthe following operations.1. The log in the unit must be got by JobAccounting Server Software.2. The setting of "Operation at Log Full"must be changed to "Does not acquirelogs".Warning □USB Hub UnsupportedPlease detach itLights up Indicates that the USB hub is connected,which is not supported by the printer.This status will be displayed untilunconnection of that USB hub.Warning □Unsupported USB Device DetectedPlease detach itLights up Indicates that the USB device is connected,which is not supported by the printer.This status will be displayed untilunconnection of that USB device.Warning □Collate Fail:Too Many PagesPress ONLINE ButtonLights up Memory overflow was occurred in the collatecopy. Stays displayed until the ONLINEbutton is pressed.
|
