- 26 -About the Options1 SetupInstalling a Hard Disk1 Turn off your printer, and then unplug allthe cables from the printer.Reference● "Turning Off the Power" P.292 Open the access cover (1) on the rightside of the printer.13 Loosen the screw to remove the metalplate (2).24 Make sure the LED (3) indicated by thearrow is unlit. If it is lit, wait until itturns off.35 Attach a hard disk (4), and fasten twoscrews to secure it.46 Plug the white connector (5) of the harddisk first into the printer then plug theother connector (6) into the printer.56
