- 18 -About the Options1 Setup●● About the OptionsAvailable OptionsThe following options are available for yourprinter:● Additional tray unit (tray 2/3/4)● Printer stand● Additional RAM (512 MB)● 160 GB hard disk● Large-capacity tray unit (LCF) (For detailson how to attach it, refer to the instructionmanual furnished with the LCF.)● Printer stand anti-tip foot (1 set)Attaching a Printer Stand To attach a set of anti-tip feetScrews (22)Anti-tip FootCover (2)Anti-tip FootRear (2)Anti-tip FootCover (2)Anti-tip Foot(2)Anti-tip FootSide (2)1 Attach the anti-tip feet (both sides andfront) with four screws.Note● Attachment directions are different for the left sideand the right side.2 Put the bottoms of the anti-tip feet (bothsides) on the floor, align the sides to thecabinet and tighten them with the twoscrews each.Screw Hole
