49 — Key operator programsKEY OPERATORPROGRAMSUsing the programsWhen using the key operator programs for thefirst time, register a key operator code number.When the machine is being operated from theoperator panel:1. Press the [MENU] key. Press the [MENU]key repeatedly until the message “KEYOPERATOR PROGRAMS” appears.KEY OPERATORPROGRAMS2. Press the [OK] key.ENTER KEY OPERATORCODE - - - -The message shown above will appear.3. Enter the first digit of your key operatorcode number and press the [OK] key.ENTER KEY OPERATORCODE * - - - -The factory default setting of the key operatorcode number is 00000.The “-” at the first digit will change to “*” and “-” at the second digit will blink. To correct theentered number, press the [BACK/C] key.4. Use the same procedure as step 3 to enterthe key operator code number from thesecond digit to the fifth digit and thenpress the [OK] key.Press the Sor T key to select the desiredprogram and press the [OK] key.For example, to register a key operator codenumber, select [KEY OPERATOR CODE CHANGE]and press the [OK] key.5. Press the Sor T key to select the desireditem.6. To exit the program, press the [MENU] key.
