Finisher — 76Misfeed in the finisherWhen a misfeed occurs in the finisher, removethe misfed paper following the procedurebelow.1. Remove the misfed paper from the outputarea. Be careful not to tear the misfedpaper during removal.2. Open the finisher top cover. Move the tabin the direction of the arrow as shown inthe illustration to open the top cover..3. Remove the misfed paper.Be careful not to tear the misfed paper duringremoval. After removing the paper, press downon the top cover to close it.4. Release the latch to open the finishercompiler.5. Raise the paper guide and remove themisfed paper.Do not remove paper from the staplercompiler.6. Close the finisher compiler.Top coverPaperguide
