79 — Saddle stitch finisherSADDLE STITCH FINISHERThe saddle stitch finisher can automatically place two staples for centreline binding of prints and foldthem along the centreline. An optional hole punching unit is available for installation into the finisher.Part names● Do not press on the saddle stitch finisher (particularly the offset tray).● Be aware that the offset tray moves up and down during printing. Take care not to obstruct the tray.● Check the correct configuration requirement for the installation of the saddle stitch finisher. Certainconfigurations will not work.SpecificationsName Saddle stitch finisherNumber of trays TwoPaper output Print face downTray system Upper tray: offset tray, Lower tray: saddle stitch trayTray capacity Upper tray: Non-stapling: Max. 1,000 sheets for A4 or 8½ x 11 or smaller sizes (80 g/m 2 or 20lb), max. 500 sheets for 8½ x 13 or B4 or larger sizes (80 g/m 2 or 20 lb) Stapling: Max. 30stapled sets and max. 1,000 sheets for A4 or 8½ x 11 or smaller sizes (80 g/m2 or 20 lb), max.30 stapled sets and max. 500 sheets for 8½ x 13 or B4 or larger sizes (80 g/m 2 or 20 lb)Lower tray: Stapled print capacity is (6-10) sheets x 10 sets or (1-5) sheets x 20 sets.Paper size Upper tray: 11 x 17, 8½ x 14, 8½ x 13, 8½ x 11, 8½ x 11R, 7¼ x 10½, 5½ x 8½R, A3, B4, A4,A4R, B5, B5R, A5R Lower tray: max. 11 x 17, 8½ x 11R, A3, B4, A4RPaper weight Upper tray: 60 to 205 g/m 2 or 16 to 54 lbLower tray: 64 to 80 g/m 2 or 17 to 34 lbPaper types Upper tray: plain paper, thick paperLower tray: plain paper onlyTray full detection Provided in both traysOffset function Upper tray onlyPaper sizes for stapling 11" x 17", 8½" x 14", 8½" x 13", 8½" x 11", 8½" x 11"R, A3, B4, A4, A4R, B5, and B5RLower tray:11" x 17", 8½" x 11"R, A3, B4, and A4RStapling capacity A4 or 8½" x 11" or smaller size: 50 sheets*(80 g/m 2 or 20 lb)8½" x 14" or B4 or larger size: 25 sheets*(80 g/m 2 or 20 lb)*Up to two sheets of 128 g/m 2 or 34 lb paper can be included as coversStaples Upper tray: Single staple can be placed in the top left or lower left corners or two staples can becentred on the left sideLower tray: 120 mm (4 47/ 64") pitch from the centre of paperPower supply Requires the installation of an optional power supply unitDimensions 718 mm (W) x 603 mm (D) x 1000 mm (H) (289 / 32" (W) x 23¾" (D) x 393 / 8" (H))Weight Approx. 39 kg (86 lb)Name Punch moduleNumber of holes/hole diameter Three holes: 6.5 mm or 17 / 64 "Specifications are subject to change without noticeStapler compilerPaper to be stapledis stacked temporarilyTop coverOpen for misfeed removalOffset trayOutput which is stapledor offset will bedelivered to this trayStapler sectionOpen the front coverand pull out this sectionto replace the staple cartridgeor to remove jammed staplesSaddle stitch traySaddle stitched outputis delivered hereFront coverOpen the front cover and pull out thissection for staple cartridge replacementor to remove jammed staples