C5300 Menu Functions • 193NOTEThe printer automatically adjusts color balance and densityat appropriate intervals, optimizing the printed output forbright white paper viewed in natural daylight conditions. Theitems on this menu provide a means of changing the defaultsettings for special or particularly difficult print jobs.Settings revert to their default values when the next print jobis complete.Color MenuNote: Factory default settings are shown in bold.Item Settings ExplanationDENSITYCONTROLAUTOMANUALAUTO = image density is automaticallyadjusted:• at power on• when a new image drum or tonercartridge is installed• at intervals of 100, 300 and 500 drumcountsAuto adjustment takes up to 55seconds.Switch to manual only if you wish toinitiate Density Control manually usingthe printer menu.AUTO DENSITY EXECUTE Selecting this will perform the autodensity set up.COLOR TUNING PRINTPATTERNPrints the pattern for the user tomanually adjust TRC. Ordinarily thisfunction is not needed because TRC isautomatically adjusted. See “SettingColor Tuning from The Front Panel” onpage 216.
