C5300 Menu Functions • 196System Configuration MenuNote: Factory default settings are shown in bold.Items Settings ExplanationPOW SAVETIME5153060240Adjusts the time before the printerautomatically switches into power savingmode. In this mode power consumption isreduced, but when a job is sent the printerwill require a warm-up time of up to 1minute before printing can begin.PERSONALITY AUTOPCLIBM PPR III XLEPSON FXPS3EMULATIONThis item selects which industry standardemulation your printer uses. When set toAUTO, incoming data is examined andthe correct emulation is automaticallyselected each time a print job is received.PARA PS-PROTOCOLASCIIRAWSets the protocol to be used for Postscriptemulation print jobs through the parallelinterface.USB PS-PROTOCOLRAWASCIISets the protocol to be used for Postscriptemulation print jobs through the USBinterface.NET PS-PROTOCOLRAWASCIISets the protocol to be used for Postscriptemulation print jobs over the network.CLEARABLEWARNINGONJOBWhen ON, non-critical warnings, such asrequests for a different paper size, can becleared by pressing the ON LINE button.When set to JOB, they are only clearedwhen the print job resumes.AUTOCONTINUEONOFFDetermines whether or not the printer willautomatically recover from a memoryoverflow condition.MANUALTIMEOUTOFF3060Specifies how many seconds the printerwill wait for paper to be fed beforecancelling the job.