A Guide to printing> 33This procedure is essential if you subsequently add extrahardware features to your printer after the drivers have beeninstalled and set up.WINDOWS1. Access the driver’s [Properties] window. (See “Changingthe driver defaults” on page 31.)2. Select the [Device Options] tab.3. In the Windows XP PostScript driver the tab may be called“Device Settings”.4. Set the options for any devices you have installed,including the correct number of paper trays, high capacityfeeder, duplex unit, etc.5. Click [OK] to close the window and save your changes.M AC OS9There are 2 methods to configure printer hardware options,depending on whether or not you use Desktop Printing:> Use the desktop printer icon if you use desktop printing;or…> Use the Chooser if you do not use desktop printing andprint via AppleTalk.CONFIGURING HARDWARE OPTIONS FROM THE DESKTOPUse this method if you have a printer icon on your desktop.1. Select the printer icon on the Desktop for your printer.2. From the [Printing] menu, choose [Change Setup…].Downloaded From ManualsPrinter.com Manuals
