A Guide to printing> 353. Select your printer driver on the left-hand pane ofChooser (for example “LaserWriter 8”).4. Select your printer model in the right-hand pane ofChooser.5. Click [Setup…].6. Click [Auto Setup].7. The printer is queried and additional hardware optionsare automatically detected.Printers connected via USB:It is not possible to change printer hardware options for printersconnected via USB in Classic Mode. If you change the hardwareconfiguration of your printer, you must delete the existing printerand set it up again. When the printer is set up, hardware deviceoptions are automatically detected.Printers connected via LPR (TCP/IP):It is not possible to change printer hardware options for printersconnected via LPR (TCP/IP) in Classic Mode. It is recommendedyou connect to your printer via AppleTalk instead.M AC OS X1. Open the Printer Setup Utility (OS X 10.3) or PrinterCenter (OS X earlier versions), and ensure that yourprinter model is selected.2. Choose [Printers] → [Show Info] → [Installable Options].3. Select all hardware options appropriate to your printer,and click [Apply Changes].Downloaded From ManualsPrinter.com Manuals
