- 113 -Moving or Transporting Your Printer4 4. Maintenance●● Moving or Transporting Your PrinterThis section explains how to move or transport your printer.Moving Your PrinterCAUTION It may causeinjury.● At least two people are needed to lift the printersafely because it weighs about 37 Kg or 40 Kg.1 Turn off your printer by pressing thepower switch.Reference● “Turning Off the Power” P.212 Unplug all the cables.● AC cord and ground wire● Ethernet or USB cable3 Remove any paper from the paper trays.4 Lift your printer and move it to a newlocation.Transporting Your PrinterCAUTION It may causeinjury.● At least two people are needed to lift the printersafely because it weighs about 37 Kg or 40 Kg.CAUTION Possible to getburned.● The fuser unit is extremely hot. Do not touchit.Note● The image drum (the green tube) is very delicate. Handleit carefully.● Do not expose the image drum to direct sunlight or verybright interior light (approximately more than 1500 lux).Even under the normal interior light, do not leave it formore than 5 minutes.1 Turn off your printer by pressing thepower switch.Reference● “Turning Off the Power” P.212 Unplug all the cables.● AC cord and ground wire.● Ethernet or USB cable.3 Remove any paper from the paper trays.4 Insert your finger into the recess onthe right side of the printer and pull thefront cover open lever (1) to open thefront cover (2) forward.125 Press the output tray open button (3)and open the output tray (4).CAUTION Possible to getburned.● The fuser unit is extremely hot. Do not touchit.34
