- 53 -Printing in Custom Sizes2 2. Printing Basic Operation●● Printing in Custom SizesTo load custom size paper, you need to register the width and length of the paper before printing. Therange of the sizes you can set differs according to the paper tray.Tray Available size rangeTray1 Width:105 to 297 mm (4.1 to 11.7 inches)Length:148, 182 to 431 mm(5.8, 7.2 to 17.0 inches)Tray 2/3/4(Option)Width:148 to 297 mm (5.8 to 11.7 inches)Length:182 to 431 mm (7.2 to 17.0 inches)MP tray Width:64 to 297 mm (2.5 to 11.7 inches)Length:90 to 1321 mm (3.5 to 52 inches)Note● [Custom] is displayed only when [Paper Size] is set to[Custom].● The available size range for duplex printing is the same asthat for tray 2/3/4.1 Press the scroll button or on theoperator panel.2 Press the scroll button several timesto select [Menus] and press the<ENTER> button.3 Check that [Tray Configuration]is selected and press the <ENTER>button.4 Press the scroll button several timesto select [Tray Config] of the papertray in which you loaded paper and thenpress the <ENTER> button.5 Check that [Paper Size] is selected andpress the <ENTER> button.6 Press the scroll button several timesto select [Custom] and then press the<ENTER> button.7 Press the <BACK> button.
