Oki C823n User Manual

Also see for C813n: User manual

Contents

Oki C823n User Manual Manual pdf 20 page image

- 20 -Preparing Your Printer1 1. Setup5 Load paper with the print side face downand press it from above.Note● Do not load paper exceeding the [ ] mark (5) of thepaper guide.56 Secure the loaded paper with the paperguide.7 Check if a size of loaded paper matchesthe setting of paper size dial.8 Return the paper tray to the printer.Memo● If loading a paper that you cannot select thesize with a paper size dial options, set the dial to[Other], and then set a paper size on the operatorpanel.Turning On/Off the PowerPower Supply ConditionsThe power supply must meet the followingconditions:Voltage: 110 - 127 VAC (Range 99 - 140 VAC)220 - 240 VAC (Range 198 - 264 VAC)Frequency: 50/60 Hz ± 2%Note● If the power supply is unstable, use a voltage regulator.● The maximum power consumption of this printer is1400 W. Ensure that the power supply is sufficient tooperate this printer.● We do not guarantee operation where an uninterruptiblepower system (UPS) or inverter is used. Do not use anuninterruptible power system (UPS) or inverter.WARNINGThere is a risk of gettingan electric shock and/orcausing fire.● Be sure to turn off the power supply switch whenattaching or removing the AC cable and earth wire.● Be sure to connect an earth wire to the groundingterminal of exclusive use.● Please do not connect with the ground of a water pipe,a gas pipe, and a telephone wire, and a lightning rod byany means.● Make sure to connect with the ground terminal beforeconnecting the power cord to the power supply plug.● Be sure to plug in and unplug the AC cable while holdingon to the power supply plug.● Insert the AC cable plug completely into the wall socketsecurely.● Do not touch the power cord, or printer, if your handsare wet.● Install a power cord in the place which is not steppedon, and do not place a thing on a power cord.● Do not use the cord tied in a bundle.● Please do not use the damaged power cord.● Do not use multi-outlet adapters.● Do not connect this printer and other electric productsto the same wall socket. If it connects simultaneouslywith an air conditioner, copier, shredder, etc. Especially,a printer may incorrect-operate by the electricnoise. When you connect with the same wall socketunavoidably, please use a commercial noise filter or acommercial noise cut transformer.● Use the attached power cord and insert it directory withthe ground terminal. Do not use the power cord forother product for the printer.● Do not use an extension cord. When you use itunavoidably, use the thing more than rated 15 A.● Use of an extended code may not operate a printernormally by AC voltage descent.● During printing, do not shut off a power supply or do notpull out a power supply plug.● When you use it neither for consecutive holidays nor atravel for a long time, pull out a power cord.● Do not use attached power cord to the other products.